Rationalised sizes of Angles and Section Weight
The Coils are uncoiled and cut into a desired width by the process of slitting the coils, and the desired length by uncoiling the coils and cut them into a required length. Coils that is cut to length (CTL) is normally shipped flat-stacked and that is called as Sheets. Sheets are of different types like H.R Sheets, C.R Sheets, G.P Sheets, G.C Sheets, Stainless Steel Sheets etc |
HR / CR Sheets |
8 |
4 |
31.40 |
| } IS : 2062 Gr. A / Gr. B / Gr. C, IS : 2002 |
| } ASTM A36. ASTM A285 Gr. C, ASTM A588 Gr. A |
| } SAILMA 300HI / 350HI / 410HI / 450HI |
| } ASTM A515 / A516 Gr. 60, 65, 70 |
| } ASTM A204 Gr. B, ASTM A537 CI-1 |
| } SAIL HARD, SAIL-COR, DEAD SOFT QUALITY |
| } LLOYDS Gr. A, NCD 1431, NE S-791 |
| } GOST 5521, DIN-17100, 17155 |
| } API 5LX42, 46, 52, 56 |
| } IRSM-41, SBQ Gr. A |
| } IS : 8500, IS : 5986 |
| } LO-PEARL, E-38 / E-34 |
| } IS : 3502 FOR CHEQUERED PLATES |
|
9 |
3.55 |
27.90 |
10 |
3.15 |
24.75 |
11 |
2.80 |
22.00 |
12 |
2.50 |
19.60 |
13 |
2.25 |
17.00 |
14 |
2.00 |
15.70 |
15 |
1.80 |
14.15 |
16 |
1.60 |
12.55 |
17 |
1.40 |
11.00 |
18 |
1.25 |
9.80 |
19 |
1.12 |
8.80 |
20 |
1.00 |
7.85 |
21 |
0.90 |
7.05 |
22 |
0.80 |
6.30 |
24 |
0.63 |
4.95 |
26 |
0.50 |
3.90 |
28 |
0.40 |
3.15 |
Galvanised Plain Sheets
0.3, 0.35, 0.4, 0.45 |
900, 1000 |
2500, 3000 |
0.5, 0.55, 0.6 |
900, 1000, 1100 |
2500, 3000 |
0.63, 0.8, 1, 1.25, 1.4, 1.6 |
900, 1000, 1100, 1200, 1220 |
2500, 3000 |
Galvanised Corrugated Sheets
1.6 (16),1.25 (18), 1.00(20), 0.8(22), 0.63(24) & 0.50(26) |
810 & 910 |
2500 & 3000 |
|
|
